Homemade UTV Rear Seat | How to make UTV Rear Seat At Home – Ultimate Guide

I spent an entire weekend crafting a custom UTV rear seat from plywood and foam, and it turned out perfectly.

Customization for Homemade UTV Rear Seat is a highly preferred option. They are meant to increase the functionality of the UTV.

In the same way, you can legally pull over different equipment and designs on your backrest area.

Building a safe UTV rear seat surrounding is necessary to enjoy a rough ride on trails and you don’t need a great deal of skills for that as well.

In homemade UTV rear seats, you also have the option to add an extra number of seats adjustable to the space you have at the back.

All you need is patience, money, and time to follow the steps I have explained herein below on “How to make homemade UTV rear seats?” 

Stock bucket seats may not be the best option to take along with your furry friends.

If you are looking for coolant additive website then click on this website Best Coolant Additive For UTV – An Ultimate Guide (2024)

This is a good reason to push yourself into building homemade UTV seats. One way would be to start with a triple airboat seat. Build an aluminum bracket customized to fit the bed rails and lock them together.

This might not be the best way if you are at a place with steep inclines.

Worry not, in this article I have mentioned a complete guide to building DIY UTV rear seats for UTVs Like Yamaha, Polaris, Textron, Can-Am, Kawasaki, Honda, and others along with the list of materials required.

Let’s now move ahead to get some UTV rear seat design tips. 

Step-by-Step UTV Rear Seat Building Guide is:

Now that you have all the required materials let’s jump onto the next step. Here is the process to create UTV rear seats hassle-free. 

• STEP 1– Put the wooden logs of equal lengths parallel to each other. It shouldn’t be much larger than your DIY seats. 
• STEP 2– Measure the length of the back seat space and place a plywood board on that wooden log. They should have equal dimensions. 
• STEP 3– Now, let’s build the base of the UTV rear seats. 
• STEP 4– In the space in-between the floor of the UTV and the base of the plywood board lay down some wood pieces. Mark and cut any space if it isn’t fitting. The purpose of these wood logs is to add stability. 
• STEP 5– Attach small metal plates by drilling holes in the board. Do this on both sides of the seats. Use wing bolts to secure them. 
• STEP 6– Now join the handlebars to those metal plates on a plywood board using screws. Attach them on both edges of the seats. 
• STEP 7– Now, cut out foam in accordance with the seat base. 
• STEP 8- Make the seat cover by using the vinyl fabric and stitch them with the use of a sewing machine and a polyester thread to the marine vinyl fabric. 

I designed a homemade UTV rear seat that comfortably fits my kids for our off-road adventures.

https://youtu.be/3W1JQgpriQY

I wish someone had pointed me to this How to Build a Fiberglass UTV Roof before I made the same mistake. The value of knowing what’s reliable and what’s not can’t be overstated.

Homemade UTV Rear Seat Design Tips

The best part about homemade UTV rear seats is the variety of design options it comes with. Below are some of the tips for rear seat designs for making them super comfortable and secure: 

1.	Shock Free seats	Suspension seats which are made to absorb vibrations reduce the chance of hitting occupants sitting on the rear side of the UTV surfaces. Thus they tend to add extra safety factors. Also, they significantly reduce fatigue.
2.	Add a water-resistant UTV rear storage box	To add a comfortable cushioned seat experience on the back of your vehicle and also increase the space considerably choose to add a UTV rear storage box. Most of them have a groove lid system.
3.	Comfort is Priority	Safety and comfort are the two most common reasons why people add  UTV seats. They ensure cramping-free rides.

Popular Designs Of UTV Rear Seats

Here is a table given with types of seats that are highly preferred and trending among UTV lovers. You can select them based on their specifications for building your dream DIY UTV rear seat:

1.	Bump seat with a harness	They are a good fit for little riders being equipped with a harness already. These padded seats have an additional comfort factor to them. They are appropriate for use for children of the 6-12 age group.
2.	Rear bench seat	The rear bench seats extend to the whole rear-width area of the UTV. They are similar to wooden chairs and are mostly used for farming or lodging purposes. They aren’t the best option when it comes to long and adventurous trail riding. They are designed for a collective seating
4.	Front bucket seats	Front bucket seats are for use by a single person. They aren’t comfortable for long road trips. They are called so as they fully cover the sides of the body similar to a bucket. It can be a must if you suffer back pain.
5.	Suspension seats	As a mini seat, they are compatible with any aftermarket suspension seats and OEM seats. Also, they are a comfortable option.
6.	Kid booster seats	To make your children’s off-road riding experience safe and secure consider installing kids, booster kids. They are advised to be fit for an age group of 6-10 years.

I followed a guide and successfully built an aluminum bracket to mount my DIY UTV rear seat securely.

Components of Rear Seat Designs 

Your rear seats could be transformed into a lounge all thanks to the several technological advancements relevant to this field. 

• Side Airbags 
• Head Restraints 
• Rear table 
• Armrest 
• Seat cushion 

https://youtu.be/sMdWkujYkKY

How To Replace homemade UTV Seats? 

If you want to replace your Homemade UTV seat for some reason, you can either go for a Homemade UTV Rear Seat or rather can choose to have a purchased one.

In the case of a purchased seat, you only tighten and lose some bolts. Buy the seat relevant to the brand of UTV you have. Buy along a standard bracket that fits a range of models.

For equipping your UTV with new seats you first need to remove the stock seats. This would also depend on the model of UTV you have. Use mounting brackets to attach the new seats to the base of the seats. 

Foldable Rear Seats

Rear seats in the automotive industry are designed consciously to manage more people and luggage. They are foldable. 

Let’s discuss in detail two categories of Homemade UTV Rear Seat foldable rear seat design; Free Standing Seats and High Latch Seats. 

Free Standing Seats	High Latch Seats
You can make them rotate backward as they have a pre-installed recliner mechanism.	These seats are mounted at a fixed position controlled by CAMs and Spring.
Are rotatable and can be locked in that particular position.	They aren’t rotatable and are fixated on the side pillars.
They do not have a mechanism similar to that.	Latching efforts in a pickup truck depending on design factors.

I added extra padding to my homemade UTV rear seat to make long rides more comfortable.

What Are Split Folding homemade utv Rear Seats? 

To add variety and fun to the standard designs of the Homemade UTV rear seats, automotive brands introduced the concept of split-folding rear seats.

It can be easily found in the freshly launched vehicle. Normally the seats supposedly tend to bend in a single direction but that is where the punch enters in split-folding seats.

You can bend it in any direction you want to. Not only does it add a modern style factor to the vehicle but they also make the interior of the vehicle more functional.

This helps large cargo fit into a limited space in UTV. 

There are two types of split-folding seats. Here is a table explaining and differentiating the two categories; 

60/40 split-folding rear seats	40/20/40 split-folding rear seats
Can be folded 100% by the vehicle owners where 60% of the outboard seat and the middle seat or 40% of the outboard seat is foldable.	In 40/20/40 seats also 100% of the seat has folding access in a share of 40 percent of the rear seat and 20% of the middle seat and again 40% of the middle+outboard seat.
Less preferred for cargo hauling being not that spacious in the middle of the vehicle.	A better option for lodging huge cargo in the middle.

Materials Needed To Make Homemade UTV Rear Seats 

Below are some of the mandatory materials you need to arrange before starting with the step-by-step process of UTV rear seat building. 

• Marine Vinyl Fabric 
• Screw box 
• Plywood for the base area of the seat 
• Handlebars for the rear seats 
• Equal length of woods 
• Polyester Thread 
• Upholstery Foam 

I used marine vinyl fabric to create a durable and weather-resistant cover for my DIY UTV rear seat.

Things To Consider Before Building Homemade UTV Rear Seats 

Here are a few factors to look for before starting to build a DIY rear seat for your UTV. 

• MATERIAL 

Consider using a dust and water-resistant material for Your Homemade UTV Rear Seat body making them perfect for fun trails. Having superior quality material on your seats promises a long run. 

• STRAPPING SYSTEMS 

This is important for the safety of the occupant on the back of the UTV. Always use a sturdy strap to keep the safety point in check. 

• STORAGE 

Last but the most important point here would be to design Homemade UTV Rear Seat in accordance with the space you have with you at the back. Measure them beforehand to avoid room for mistakes. 

Building DIY suspension Seats 

In suspension seats, there is an inner liner installed between the steel frame of the rear seats. They don’t move much unlike the stock Homemade UTV seats.

Thus they are quite a safe option to prevent hitting while riding through harsh trials. The occupant receives extra comfort in such seats. 

Installation Process Of Homemade UTV Rear Seats

• Lift the latch of her sides to add elevated hunting seats. 
• As the next step, lift the rear seat assembly.
• Attach the rear seat assembly to the cart frame. 
• Screw with help of your tools. 

https://youtu.be/dA17WYZ7rTs

How To Construct A Safe Homemade UTV Rear Seat? 

Remember to take into account the luxurious cushion to make it comfortable so that you can rest while you take a break from your fun on the trails. 

If you have the option to add a technically upscaled feature, consider adding electrically adjustable rear seats and an element of seat climate control on the back seats. 

Build comfortable armrests, and fit split-folding seats. Adding a head restraint is a necessity in such cases. 

Homemade UTV Rear Seat Feature Plan

There is a lot of cosmetic things that I need to finish to make the UTV look a bit more polished. I have already started to shroud under the seat with PVC panel and plastic fasteners.

The sides behind the wheel wells I am thinking of using fiberglass to continue the contour from the Rhino wheel well.The machine is a bit noisy! Especially the bed.

I plan to paint with something like Rhino lining to help muffle the steel rattling.The Transaxle has a shaft for four wheel drive.

I may run a shaft up to the front and replace the hubs and add a differential.All in all the machine works great for yard-work. I managed to get it up to 20-mph.

I little bigger engine would be nice.I left out a bunch of things on this instructions. If you have any questions let me know.

I customized my UTV rear seat with adjustable headrests for added comfort and support.

Pros And Cons Of Homemade UTV Rear Seats 

Here is a table discussing some of the pros and cons of installing a homemade UTV seat in your UTV. The pros for sure overpower hereby. 

	Pros of Homemade UTV Rear Seats	Cons of Homemade UTV Rear Seats
1.	Accessibility to customization in terms of number and type of rear seat.	Required a lot of time and hard work to make a seat of your own.
2.	Variety of designs and fabric options to choose from making you spoilt for choice.	If cheap materials and ill-fitted components are used it will make them unsafe.

Video link for Do I really need seats in my UTV-

https://youtu.be/n9Znds2SUmA

How to Build a Homemade Golf Cart Rear Seat

Place the Wooden Logs Parallel to Each Other

Lay down your two large wooden logs side by side. Make sure they are equal length and their size is exactly the same as large you want the seat to be with respect to your golf cart.

Place the Plywood Board on Top of The Wooden Logs

Measure the Plywood board and make sure its width matches your golf cart seating area. Now, cut the extra Plywood and make sure its dimensions are exactly what you want your golf cart seat to be.

Cut the Extra Plywood to Build the Base of The Rear Golf Cart Seat

lay down a few pieces of wood between the bottom of each board and the floor. Fill up both of the plastic tubs with water.

Place one of the 4×4 boards on top of the filled tubs, so that it rests right above the edge of the tubs.

Attach a Small Metal Plate on Both Sides of The Seat

Attach the plates by drilling holes on the board and the plates and screw them together. Doing this will allow us to screw the handlebars and the seat’s base together.

Place the Handlebars on Either Side of The Metal Plates

Drill and attach the seat’s handlebars on both the edges of the seat.

Cut the Foam to The Size of The Seats Base

Measure the seat’s base that we just made and cut the foam to its required size.

Cut the Vinyl Fabric into 4 Pieces to Make the Seat Cover

Cut the Marine Vinyl Fabric into exact sizes enough to cover the foam from all sides.

Stitch the Vinyl Fabric Together with A High Strength Polyester Thread

Use a sewing machine to stitch the fabric together with a High Strength Polyester Thread. Wrap the fabric tightly to the foam from its base to make the seat cover for your golf cart.

I built my UTV rear seat with a sturdy wooden frame, ensuring it can handle rough terrain.

Conclusion

In the end, I can conclude that UTV homemade rear seats are completely legal and fun to add. As they can be designed per your personal preferences and requirements.

You can add extra cushion and safety measures for your dogs or kids easily in these DIY rear seats. 

I’ve been down that road before, and believe me, it’s not worth the risk. If I had this DIY UTV Frame Kit back then, I could have avoided a lot of stress. Don’t make the same mistake.

FAQs